







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Fence Installation: The Mission Viejo Owner’s Guide
Unilock fence installation in Mission Viejo typically runs $3500 – $9000 installed, depending on wall height, lineal footage, and whether the project includes a Unilock pillar-and-panel system or a simple post-and-rail run. We install Unilock-compatible fence systems on scheduled jobs, not as a same-day emergency service. Unilock is a premium brand with documented specs, and we treat it that way.
Most owners don’t discover their fence failed until a section starts leaning after a Santa Ana wind event, or a post base cracks and pulls away from the footing. The failure usually traces back to something specific: a footing poured too shallow for our expansive clay soils, a panel anchored to a post that flexed under load, or a finish that degraded faster than expected on a south-facing exposure. We’re an independent contractor and not affiliated with Unilock, but we know the product line and what to look for.
Which Unilock Models This Applies To

Unilock’s fence systems pair precast pillars and caps with panels or rail sections, and the compatibility gotcha is this: pillar caps and post bases are spec’d to specific pillar dimensions, and a cap sized for one pillar series won’t seat correctly on another. If you’re matching an existing run, measure the pillar width and cap overhang before you assume a part fits. The model number is usually stamped on the cap underside or on a label affixed to the pillar base.
For OEM versus aftermarket: Unilock-branded caps and connectors carry manufacturer specs and warranty backing, which matters when you’re matching an existing installation. Quality aftermarket equivalents exist for standard sizes, but we’ve seen aftermarket caps that fit loosely and trap water at the seam, which accelerates freeze-thaw damage. On a Mission Viejo hillside lot where wind load is a real factor, we lean toward the manufacturer-specified part unless the aftermarket piece is a documented dimensional match. We don’t stock parts and don’t carry them on a truck; we source to your spec and document what’s installed. The same disciplined approach applies to the KraftMaid, Cambria, and Silestone selections we handle on the interior side of the house.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Fence Installation Is Failing
- A pillar leaning after wind or rain. The footing is undersized or the soil around it has settled. A pillar that leans more than an inch out of plumb typically means the base needs to be reset, not just braced.
- Cracks at the base of a pillar or along a panel seam. Hairline cracks that widen over a season point to movement in the footing or a panel that’s bearing load it wasn’t designed for.
- Loose or rattling caps. Adhesive failure or a cap seated on an out-of-spec pillar. A cap that lifts by hand lets water in, and water in a precast cap is a freeze-thaw problem in cold snaps.
- Fading or chalking on a south-facing run. UV exposure on a Mission Viejo south wall degrades a finish faster than on a shaded run. Chalky residue that wipes off is early finish breakdown.
- A gate that drags or won’t latch. The post has moved, or the hinge hardware has loosened from a post that’s no longer plumb. This one is often the first sign the whole run has shifted.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A full Unilock fence installation in Mission Viejo lands in the $3500 – $9000 range. A short decorative run with standard pillars sits at the low end; taller pillar-and-panel systems with more lineal footage and footing work push toward the top. Partial repairs like resetting a single pillar or replacing a cap typically come in well under a full install, and we’ll tell you which one the job actually calls for.
What drives the range: lineal footage, pillar count and height, footing depth (our clay soils sometimes require deeper footings than a standard spec), and whether the existing fence has to come out first. Every price we give is written before work starts, with the parts and labor broken out, and every completed install carries the 365-Day Done Right Promise. If the work fails within that year, we come back and correct it at no charge. No number moves at the door.
DIY or Call Us?
You can safely check a few things yourself: measure the pillar width and cap overhang to confirm the part spec, look for cracks and note whether they’re widening, and check footing depth by probing the soil beside a post. What you shouldn’t do is try to reset a leaning pillar or re-anchor a panel on your own. A Unilock pillar can weigh several hundred pounds, and a pillar that tips while you’re working under it is a genuine safety problem. Set it wrong and it leans again within a season.
The footing work is where DIY goes wrong most often. A shallow footing in our clay soils will heave and settle, and the failure shows up two winters later as a pillar out of plumb. We do the footing to spec, document the depth, and stand behind it. Call us at (833) 734-2429 to schedule a free estimate. A live person answers, day or night.
FAQs

A properly installed Unilock fence with correct footing depth typically lasts 20 to 30 years in our climate, with finish fading being the main long-term wear item on sun-facing runs. The footing is what determines whether it lasts that long or fails in five years. Call (833) 734-2429 for an exact quote on your repair or install; estimates are free.
Often yes. A single leaning pillar, a loose cap, or a cracked panel is usually a repair, not a replacement, and repairing the specific failed component is cheaper than a full run. We’ll assess on site and give you a written price for both paths. Call (833) 734-2429 to schedule.
A single pillar reset or cap replacement is usually a one-visit job. A full fence install depends on lineal footage and footing work, and we’ll give you a written timeline with the estimate. Call (833) 734-2429 for a free estimate and a clear schedule.
We source to your spec from documented suppliers and match the part to your existing pillar dimensions, so the fit is traceable. We don’t stock parts or carry them on a truck, which means every part is ordered for your job, not pulled from a bin. Call (833) 734-2429 to get a written price on your specific part and installation.
Written by the team at Bradford Remodeling Co Mission Viejo, serving Mission Viejo and nearby areas.












