







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Driveway & Pavers: The Mission Viejo Owner’s Guide
We install Therma-Tru door systems and Belgard hardscaping together on Mission Viejo homes, and a paired driveway-and-entry package typically lands between $7,000 and $18,000 installed, depending on square footage, paver choice, and how much base prep the slope needs. Most owners call us after a different failure than they expected: the door component they thought was the problem turns out to be a settled or heaved driveway pulling at the threshold and sidelites. If your Therma-Tru entry no longer closes cleanly, or your pavers have started rocking against the door frame, that pairing is usually the real story. We’ll explain which part fails first, what fits your model, and what it costs in Mission Viejo.
Which Therma-Tru Models This Applies To

Therma-Tru entry systems (the fiberglass and steel door lines plus their sidelites and transoms) are the parts that pair with hardscape here. Hardscaping itself isn’t a Therma-Tru part, so it’s not a swap-for-a-part situation; the Therma-Tru side is the door frame, sill, and threshold that the driveway or paver landing meets. Owners typically discover a problem in one of two ways: the door drags or the threshold separates, or pavers against the entry begin to rock and hold water. That points to a base or grade issue around the door, not a manufacturing defect in the door.
To identify what you have, check the door for a label or stamp, usually inside the jamb or on the door slab edge, showing the series and a model or part number. Measure the rough opening width and height, and photograph the sill from inside and out. That photo set lets us confirm whether you’re matching an existing Therma-Tru door or replacing one that no longer sits level. If we’re sourcing a replacement sill or threshold component, we confirm the model and field-measure the opening before ordering. For the hardscape, we work with Belgard, and for the interior surfaces tied to an entry remodel, we also specify KraftMaid cabinetry, Cambria, and Silestone countertops elsewhere in the home.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Driveway & Pavers Is Failing
- The door drags or sticks at the bottom corner. A settled or heaved paver landing lifts the threshold slightly, so the slab rubs the sill. Left alone, the seal wears and lets water in.
- Pavers near the entry rock or sink. Base compaction failed, or a downspout is dumping water against the door. Water under pavers is the leading cause of a threshold that drops out of level.
- Water pools at the threshold after rain. The landing isn’t graded away from the door. Mission Viejo’s clay-heavy soil holds water, so a shallow slope pools against the Therma-Tru sill and rots the framing behind it over time.
- The threshold shifts or separates from the frame. The landing moved and no longer supports the sill. This is where a small hardscape problem starts pulling on the door assembly.
- Weeds and sand between pavers after a season. That’s joint sand washing out, often from poor drainage or a slope that wasn’t set right. It’s a maintenance signal, not a sign of a bad door.
Replacement Cost & What’s Included

Here’s what the work runs in Mission Viejo. These are installed ranges that include prep and materials, and we put the price in writing before any work starts, regardless of what we find once the base is opened. Garage-door spring tension or buried utilities are different trades, but we flag both during scoping so the number doesn’t move at the door.
| Service | Installed Range |
|---|---|
| Paver terrace / landing tying into your Therma-Tru entry | $7,000 – $18,000 (paver driveway full scope shown below) |
| Paver driveway installation (Belgard options included) | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway sealing (maintenance) | $250 – $700 |
What drives the range up: square footage, slope, base depth on Mission Viejo’s clay soil, and whether the door needs a new threshold or sill during the same job. What’s included: written scope, base excavation and compaction, drainage corrected away from the door, and the 365-Day Done Right Promise. If the work fails within that year, we return and correct it at no charge, and you get the guarantee in writing at job close.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely lift a paver or two to look at the base, check for standing water at the threshold after a storm, and confirm whether the door drags. What you shouldn’t take on is re-grading the slope against a Therma-Tru door or rebasing a landing that’s pulling the threshold out of level. Get the grade or the framing wrong and you invite water behind the sill, which is where the real damage starts. This isn’t a high-tension part like a garage-door spring, but it is a place where a weekend fix often makes the next repair bigger. Call (833) 734-2429 to schedule a free estimate, and we’ll tell you honestly whether it’s a paver refresh, a threshold fix, or both.
FAQs

How long does a paver driveway tied to a Therma-Tru entry last in Mission Viejo? Expect 25 to 30 years for quality pavers with proper base prep, though Mission Viejo’s clay soil and seasonal runoff are the real variable. Rebase or reseal as the joints wash out. Call (833) 734-2429 for an exact quote; estimates are free.
Can the threshold or sill be repaired instead of replacing the whole door? Often, yes. If the door slab and frame are sound and only the sill or threshold has shifted, we can address the landing and reseat the component rather than replace the Therma-Tru door. We’ll tell you which after we see the entry.
How long does the swap take? A landing or threshold fix tied to your entry typically runs one to three days for the hardscape portion, and a full paver driveway runs longer depending on square footage and base conditions. We give you a written timeline before work starts.
How do you source the Therma-Tru part? We confirm your model from the door label and field measurements, then source the matching threshold or sill component to spec. Bradford Remodeling Co Mission Viejo is an independent service provider and is not affiliated with Therma-Tru; we work with the brand as a documented material source for your entry system.
Schedule Your Free Estimate
Bradford Remodeling Co Mission Viejo installs Therma-Tru doors and Belgard hardscaping with a written price before any work starts and a live person answering the phone 24/7. Our technicians have up to 22 years of experience, and every completed job carries the 365-Day Done Right Promise. We’re part of the Garrison Partners family and operate independently under The Garrison Standard, so your scope, price, and guarantee are documented from the first call to job close. Call (833) 734-2429 for your free estimate.
Written by the team at Bradford Remodeling Co Mission Viejo, serving Mission Viejo and nearby areas.












