







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Home Additions & ADU: The Mission Viejo Owner’s Guide
Hallmark and Oxford series with steel or composite frames installed before 2022 are the most common PGT components we replace in Mission Viejo, with the 3-inch face flange standard and the 2-1/2-inch upgrade available on request. We install complete PGT units – frame, sash, glazing, and hardware – with the full assembly running $45,000 – $130,000 from demolition to final walkthrough. Tell us the model series, the glass pack, and what failed, and we’ll quote the whole job in writing before we start.
The warning signs are usually gradual. Painted aluminum frames abrade from salt air and irrigation overspray, accumulating a tan residue that streaking won’t lift. Vinyl sashes warp at the sill after 10 – 15 summers of direct sun, and when the warp passes 1/8 inch, the sash no longer seals. Lost thermal pane seals cloud the glass with silica haze, and moisture spots the frame base below.
We are an independent contractor, not affiliated with PGT, and we don’t claim a stock of parts or carry units on a truck. We source what your job needs, coordinate delivery, install to PGT’s published specifications, and back the work with a written one-year guarantee.
Which PGT Models This Applies To

PGT’s product line covers three groups that matter to Mission Viejo homeowners: the Hallmark line (single-hung, casement, and picture windows), Oxford (vinyl windows with stainless hardware and a sub-0.30 U-value option), and PremierVue aluminum-clad units specified for stricter HOA architectural reviews. The part you need depends on which series owns your opening, and the series is stamped on the manufacturer label – the ARL sticker on the head jamb has the model number and glass package code.
The compatibility trap most homeowners hit: a standard service replacement sash for a Hallmark H30-series won’t seat in a Hallmark H45-series frame unless the jamb is slid to the 2½-inch or 3-inch position. Measure the face width of the existing frame at the opening, not the rough opening, because the jamb position changes what sash will seat. Homeowners restoring an older Mission Viejo house sometimes find their existing jambs not set to either position, and the replacement won’t fit until the jamb is re-seated.
On the OEM-vs-aftermarket question: for Mission Viejo fixed windows in a high UV-load exposure, OEM is simpler because the glass surface and drain path match the frame system from the factory. For openings with sliding sashes or a spec that includes sound attenuation, a well-matched aftermarket sash from a licensed fabricator can cost 20 – 30% less, and the rest of the install is identical. We put both options in writing and let you see the trade-off.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Home Additions & ADU Is Failing
- Moisture clouding inside the glass. The insulated glass unit’s perimeter seal has failed, letting humid air condense between the panes. This is common in Mission Viejo because our inland thermal swings – hot afternoons, marine-layer cool, dry Santa Ana spells – stress the sealant more aggressively than the coastal product spec assumes.
- A tan or white residue on the frame. Painted aluminum carries an abrasion film from salt-air corrosion and alkaline irrigation overspray, and it reaccelerates after a few seasons. The film on the frame surface is a sign the protective coating is thinning at the corner welds and gaskets.
- Sash won’t seat or the lock misses. A vinyl sash that warped from sun load at the sill no longer aligns with the strike. Once warp exceeds 1/8 inch, the gap opens and you lose the seal even when the latch catches.
- Visible gaps at the corners or a frame that flexes. Corner gaskets shrink with age, so standard glass units in Mission Viejo will show a 1/16 to 1/8 inch visible daylight gap at the mitred corners. At that point the structural seal is compromised.
- Water tracks on the interior sill after rain. The frame’s weep drainage system is blocked or the exterior sealant at the flange has opened. Salt air degrades exterior caulk faster in Mission Viejo than inland code tables assume, so a 3- to 4-year sealant life is realistic on the ocean-facing side.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed costs for PGT window and frame work on a Mission Viejo home addition or ADU depend on how many openings you’re replacing and which frame spec your HOA or the city’s plan check requires. A typical full-home window replacement for an addition runs $8,000 – $25,000. The line items that move the number are: number of units and their sizes, frame material (aluminum-clad costs more than vinyl), glass package (argon-filled and low-E2 add cost), the complexity of flashing at the roof and jamb, and the permit and inspection cost for your project.
We give you a written line-item quote before any work starts – unit cost, glass package, sealant and flashing, disposal, permit fee, and labor separated. No change orders at the door.
Every install carries our 365-Day Done Right Promise: if the work fails within the guarantee period, we come back and correct it at no charge.
DIY or Call Us?
Some checks you can do safely. Measure the face width of your existing frame at the opening (not the rough opening), run a credit-card-width gap check at each glazing point to see where the seal has failed, and look at the weep holes along the sill to confirm drainage isn’t blocked by dirt or caulk. Those three checks usually tell us which part line you’re working with before we arrive.
What we don’t recommend: re-seating sashes, re-gasketting frames, or prying a frame flange that’s frozen against the stucco. The glass is tempered or laminated, and a pressure crack during a DIY pry is a real cost. Call (833) 734-2429 and we’ll tell you over the phone whether it’s a part replacement or a frame re-seat job.
FAQs

How long does a PGT window and frame assembly last in Mission Viejo?
Fifteen to twenty years is a realistic range for aluminum-clad frames on an ocean-facing elevation here, and slightly longer on inland lots. Painted aluminum frames exposed to salt and irrigation spray often show sealant failure by year 12. We check the gaskets, the weep drainage, and the flange sealant on every install so you get the full life out of the unit. Call (833) 734-2429 to schedule a free on-site assessment.
Can it be repaired instead of replaced?
Sometimes yes. A single fogged pane can be re-glazed without touching the frame. A warped sash or corner gap is almost always a full assembly replacement because the seal can’t be restored in place. We look at the age of the sheet and the cause of the failure, then tell you which is the cheaper path. Estimates are free, so call (833) 734-2429.
How long does the swap take?
A single unit is usually an afternoon. A whole-home window replacement on a Mission Viejo addition or ADU with 8 – 12 openings runs two to four days once the permit pulls and the units are on site. We give you the day count in the written quote so you can plan around it.
How do you source the part?
We order by the model series and the label code on your existing frame, and we coordinate delivery to the job site. We don’t claim a local parts stock and we don’t carry replacement units on a truck. Every unit arrives with its manufacturer glass and warranty paperwork, and we put the order details in the written scope before we start.
Call (833) 734-2429 for a free estimate. A live person answers around the clock, and we’ll have the part line, the written price, and the day count ready before anything is ordered.
Written by the team at Bradford Remodeling Co Mission Viejo, serving Mission Viejo and nearby areas.












