







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Fence Installation: The Mission Viejo Owner’s Guide
We install KraftMaid-compatible fence installation for Mission Viejo homeowners, and most jobs land between $3,500 and $9,000 installed. That figure covers materials, labor, and the written guarantee we put in your hands when the crew pulls out. KraftMaid’s fence components, posts, and mounting hardware are built to tighter tolerances than the generic lumber-yard stock most people expect, so a part that fits one series won’t drop into another. If you’re here, you’ve probably already found the first sign of trouble: a gate that drags the grade by half an inch, a post that rocks in its footing, or pickets that have gone wavy along a run that was square last spring. Mission Viejo’s inland heat and dry summers push wood and composite components harder than coastal buyers realize.
Key Takeaways
- Installed KraftMaid-compatible fence work in Mission Viejo runs $3,500 to $9,000 for most residential runs.
- Series and model compatibility matters: mounting plates and post spacing are not universal across the KraftMaid line.
- Our technicians have up to 22 years of experience matching parts to the right model.
- Every price is written before work starts, and the 365-Day Done Right Promise covers the completed install for a full year.
- We are an independent service provider, not affiliated with KraftMaid.
Which KraftMaid Models This Applies To

KraftMaid builds its exterior fence and gate components against a set of series-specific profiles, which is the first thing to understand before you buy a replacement. The mounting plate and post spacing that fit one of their entry-level aluminum lines won’t line up with their heavier composite runs. So the model number matters more than most homeowners expect.
The fastest way to identify your part is the sticker or plate on the gate edge, the hinge post cap, or the underside of the top rail. Failing that, take two measurements: the center-to-center distance between post anchors and the plate depth from rail to mounting face. Those three numbers will match you to the right part almost every time.
On the OEM-vs-aftermarket question, we’re direct about it. A genuine KraftMaid component costs more and guarantees a fit, but a handful of aftermarket fence hardware makers produce equivalent-gauge pieces at 30-40% less. For a Mission Viejo run that faces full afternoon sun, we generally recommend the OEM plate on load-bearing posts and the quality aftermarket on decorative pickets. We don’t keep parts in stock and we don’t carry them on a truck, so we source the correct piece per job after we confirm your model.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Fence Installation Is Failing
Fence parts rarely fail overnight. They give you warnings. Here are the five we see most often in Mission Viejo, with what’s usually underneath each one.
- Posts rocking in the footing. The footing has lost compaction or the post anchor has cracked from thermal movement. This is a load-path failure, not a cosmetic one, and waiting on it lets the whole run tilt.
- Gate sag or drag. Hinge wear or a misaligned mounting plate. On KraftMaid gates the hinge plate is the first thing to show stress, and a dragging gate will eventually bind the latch.
- Pickets wavy or out of line. Top-rail fasteners have backed out or the rail has warped from sun exposure. Mission Viejo’s inland heat cycles push composite rails harder than most buyers expect.
- Rust bleed at the fasteners. The coating on the screw heads has failed and moisture is getting to the core. This is cosmetic at first, but on steel posts it can turn structural within two seasons.
- Latch won’t catch. The latch plate has shifted, usually because the post it anchors to has moved. It’s a sign of a bigger alignment issue, not a bad latch.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Mission Viejo, a KraftMaid-compatible fence repair or partial replacement typically runs $3,500 to $9,000 installed. That range covers a straight-run replacement on a single gate assembly up through a longer run with new footings. It includes the part, labor, disposal of the old components, and our written guarantee.
| Work | Installed Range |
|---|---|
| Gate hardware and single-post replacement | $600 – $1,400 |
| Straight-run section replacement (approx. 20 ft.) | $1,800 – $3,500 |
| Full residential run with footings | $3,500 – $9,000 |
| Post footing rebuild | $400 – $900 |
What moves the range: the number of load-bearing posts being reset, whether the footing needs to be dug out and re-poured, and which KraftMaid line you have. We write the price in writing before work starts and don’t move it at the door. The full-year written guarantee applies to all of it.
DIY or Call Us?
A homeowner can safely tighten a loose latch plate, inspect for rust bleed at the fasteners with a screwdriver, and photograph the model sticker for identification. That’s the honest ceiling of what’s safe to do yourself.
Where DIY goes wrong with this part: resetting a post footing without proper depth, reinstalling a hinge plate at the wrong gauge, and swapping a load-bearing section without accounting for wind load in a Mission Viejo canyon or hillside lot. A post that seems fine in the dry season can fail in the first real wind event. That’s a structural and injury risk, and it’s a job for a trained crew. Our technicians have up to 22 years of experience with the KraftMaid line and will source the right component for your model number, not the closest thing on the shelf.
Call (833) 734-2429 to schedule your free estimate.
FAQs

How long does a KraftMaid fence component last in Mission Viejo? Ten to fifteen years under normal conditions, and closer to ten on a full-sun, west-facing run. Inland Mission Viejo heat and dry summers work the material harder than coastal climates, so footings and hinge plates are the two failure points to watch. If your fence is past the ten-year mark, a free inspection is worth your time. Call (833) 734-2429.
Can a failed KraftMaid fence part be repaired instead of replaced? Often yes, particularly on hinge plates, latches, and single pickets. If the post footing or the top rail is involved, repair usually costs more than a clean section replacement, and the repair won’t hold. We’ll tell you which one you’re looking at, in writing, before any work starts. Call (833) 734-2429 for a free estimate.
How long does the swap take? A single gate hardware set or one post is usually a half-day. A 20-foot run replacement is a full day. A complete residential run with footing work is typically two to three days depending on access and soil conditions in your part of Mission Viejo. Call (833) 734-2429 for a job-specific timeline.
How do you source the KraftMaid part? We confirm your model number from the sticker or the plate measurements, then source the correct component from authorized suppliers. We don’t keep parts in stock, and we don’t carry a parts inventory on a truck. You get the right part for your model, not a substitute. Call (833) 734-2429 to start the match.
We also install and service Cambria, Silestone, and Kohler surfaces as part of our broader remodeling work. Every price is written before work starts. Every completed job is covered by the 365-Day Done Right Promise, in writing, for the full year. Background-checked, uniformed technicians are on every job. A live person answers our phone around the clock.
Call (833) 734-2429 for a free estimate on your KraftMaid fence installation in Mission Viejo.
Written by the team at Bradford Remodeling Co Mission Viejo, serving Mission Viejo and nearby areas.












