







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Home Additions & ADU: The Mission Viejo Owner’s Guide
We install ES Windows-compatible additions and ADUs in Mission Viejo, and a typical project runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a detached or attached ADU, priced in writing before the first tool comes out. We schedule these as planned construction, not same-day work. If your ES Windows assemblies are leaking, fogging, hard to operate, or the glazing line has failed behind a finished addition wall, that’s the part you’re likely dealing with, and this page is built to get you a real number and a real scope.
Most Mission Viejo owners only discover the problem after the fact. A window wall in a new addition starts fogging between the panes. A slider on a converted garage stops rolling straight. An ADU bedroom frame won’t close because the sash has shifted on its track. By the time it’s visible, the ES Windows part has usually been failing quietly for months.
Which ES Windows Models This Applies To

ES Windows built a long line of vinyl and aluminum assemblies for California additions and ADUs, and the part you need depends entirely on which series the original build used. Vinyl single-hungs and sliders from the mid-2000s and later use a different balance, roller, and glazing bead than the earlier aluminum frames, and they are not interchangeable. Spend five minutes identifying your unit before you price anything.
Check three places:
- Glass corner stamp or etch. Every ES Windows unit carries a manufacturer mark. Photograph it – it tells us the series and often the production era.
- The frame label. Pull the sash aside and look at the jamb. Model numbers live in a small printed label, and they include the size code.
- Measure the rough opening and the sash itself. Two units that look identical can differ by a fraction of an inch, which is the difference between a roller that seats and one that grinds.
OEM parts carry the exact fit, but the supply chain for many ES Windows series is slow and some components are discontinued. Quality aftermarket equivalents are often a better play for rollers, balances, weatherstripping, and glazing gaskets, provided the spec matches. The frame and glass assemblies are a different story; those get sized to the existing rough opening and matched to the glazing spec, not swapped from a shelf. We don’t stock ES Windows parts and we don’t carry them on a truck. Every part is sourced to your unit number, not a guess.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Home Additions & ADU Is Failing
Five real symptoms, each with the cause behind it:
- Fogging or condensation between the panels. The seal on the insulated glass unit has broken and moisture has entered the airspace. That’s a failed IGU, not a cosmetic issue, and it gets worse every season.
- Sash that won’t stay up, or drops on its own. The balance spring has lost tension or the shoe has worn through. On older ES Windows vinyl units, this is the most common failure we see in Mission Viejo additions.
- Sliders that drag, jump, or come off track. Rollers have flattened or the track has a bend. Left alone, the sash frame warps and the repair moves from parts to full unit.
- Water stains or soft trim at the sill. The weatherstripping has failed and Mission Viejo’s dry summer months followed by wet winters are working moisture into the sill and the substrate behind it.
- Drafts you can feel with the back of your hand. Worn pile seals or a shifted sash are letting air past the frame, and your energy bill is carrying the difference.
One honest safety note. Window and glazing swaps involve heavy glass and, on anything above first-story height, work on a ladder or scaffold. Fragile glazing can shatter on removal. We don’t hand homeowners a step-by-step for glass work at height, and we’d rather you call us. The checking is fine; the labor is a trained technician’s job.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here is what these projects run in Mission Viejo:
| Project | Installed Price Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
What drives the number: square footage, whether the addition sits on a slab or a raised foundation, how many ES Windows assemblies are going in and which series, and whether the ADU needs a separate utility trench. Mission Viejo’s clay-heavy soil and summer heat both shape foundation depth and glazing spec, and neither is optional to skip.
Every project gets a written, line-item price before work starts. No numbers that move at the door. The scope names the ES Windows model, the part number, and the labor in one document. When we close a job, the site is clean, the scope is documented, and you have a signed written guarantee in your hand. The 365-Day Done Right Promise covers every completed project for a full year; if the work fails inside that window, Bradford returns and corrects it at no charge. That includes a failed part we installed.
DIY or Call Us?
You can safely check the symptoms, photograph the labels, measure the sash, and note which units drag or fog. That’s useful work, and we’d rather you do it – it makes the estimate more accurate.
Where DIY goes wrong: pulling a sash out of a track without knowing the balance tension, trying to reseat a failed IGU yourself, or forcing a roller swap on a warped frame and cracking the weld. Each of these turns a parts job into a full unit replacement, and the price triple. On anything above the first floor, or any glass unit larger than a standard single-hung, the honest answer is a trained technician. Our technicians have up to 22 years of experience, and they’ve seen every version of that mistake.
Call (833) 734-2429 for a free estimate – a live person answers 24/7.
ES Windows Home Additions & ADU FAQs

Ten to fifteen years is realistic for ES Windows rollers, balances, and glazing seals on a Mission Viejo addition. Mission Viejo’s summer heat cycling and inland winter moisture age both the glazing and the moving hardware faster than a coastal install. The frame will outlast the hardware every time, which is why the parts are the first thing to replace.
Sometimes. A dragging slider can often be corrected with a roller and track adjustment, and a worn balance can be swapped without replacing the sash. Failed IGUs and cracked frames can’t be repaired, only replaced. We tell you which category yours falls in after we see the label and the symptoms – and we give you the price in writing.
A single parts swap on an ES Windows unit is typically a half-day to a full day. A full window wall or multiple units in an addition runs longer, and full addition or ADU work is a scheduled multi-week project. We put the timeline in writing with the price so there are no surprises.
From your unit label, not a catalog guess. We pull the series and size code, then match OEM or a documented aftermarket equivalent to that spec. Our brand roster includes KraftMaid, Cambria, and Silestone for other parts of the build, so specifications stay traceable across the project. You get the part number in the written scope. Call (833) 734-2429 for an exact quote – estimates are free.
Bradford Remodeling Co Mission Viejo is an independent contractor and is not affiliated with ES Windows. We’re part of the Garrison Partners family, established in 2004, held to The Garrison Standard, and every project carries the 365-Day Done Right Promise.
Written by the team at Bradford Remodeling Co Mission Viejo, serving Mission Viejo and nearby areas.


