







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Roofing: The Mission Viejo Owner’s Guide
We install and repair CGI-compatible roofing across Mission Viejo, and a full roof replacement typically runs $8,000 – $20,000 installed, while a targeted repair usually lands between $400 and $1,800 depending on what failed. CGI products are common on Mission Viejo homes built in the 1970s through the 1990s, and most owners find out something is wrong the same way: a brown ring spreading across a ceiling, grit collecting in the gutter after a dry week, or a shingle edge lifting after a Santa Ana wind event. Bradford Remodeling Co Mission Viejo works with CGI components as an independent service provider and is not affiliated with the CGI manufacturer; we simply know the product, the specs, and where it fails in this climate. A live person answers our phone around the clock, and every price we give is written down before work starts.
Which CGI Models This Applies To

CGI covers several product families that show up on Mission Viejo roofs: concrete tile profiles, and shingle lines that were installed across south Orange County subdivisions through the 1980s and 1990s. Before we order anything, we confirm three things on your roof. First, the label or ink stamp: pull up one edge of the tile or check the underside of a shingle course for the CGI series marking. Second, the field measurement: tile profiles are set by span and exposure, and a tile that looks identical from the street can be an inch off in width, which means it won’t interlock correctly at the hip or ridge. Third, the profile color lot, since concrete tile pigment varies between runs and a new batch set beside 30-year-old tile reads as a patch.
The OEM-versus-aftermarket call matters more than most homeowners expect. OEM CGI replacement tile is the only sure match for interlock and color, but for shingle systems a quality aftermarket equivalent with the same exposure and a manufacturer spec sheet often gets you the same performance for less. We won’t put an aftermarket piece on a tile roof where the interlock is the whole point. For cabinetry and surfaces, our documented brand roster runs to KraftMaid, Cambria, and Silestone, and the same traceability applies here: every roofing part we specify has a manufacturer spec behind it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Roofing Is Failing
Here’s what we look for on a Mission Viejo roof, and what each symptom actually means underneath:
- Lifted or missing tiles after a wind event. Santana winds funnel through the canyons here and catch the exposed edges of field tile. Once one tile lifts, the ones beside it lose their interlock and the whole run is vulnerable.
- Grit in the gutters or at the downspout base. Granule loss means the shingle’s top layer is breaking down from UV exposure. Mission Viejo’s long dry season accelerates this, and bald shingles fail quickly once the sun starts reaching the mat.
- A brown ceiling stain or attic moisture reading. Water is getting past a flashing, a valley, or a cracked tile. The stain shows up indoors weeks after the leak began, so the true origin is usually upstream of where you see it.
- Brittle or cracked tile at the ridge and hip. Ridge and hip tiles take the most thermal cycling, and after decades of hot-afternoon-cool-evening swings they hairline-crack. Each crack lets moisture past the underlayment.
- Exposed underlayment or sagging roof deck. This means the top layer of protection is already gone. Sagging points to moisture in the sheathing itself, which is a structural issue, not just a cosmetic one.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In the Mission Viejo market, a full roof replacement runs $8,000 – $20,000 installed, a general roof repair runs $400 – $1,800, and a tile roof repair runs $600 – $2,500. What drives the range is straightforward: roof size and pitch, how much decking has to be replaced once the old layer comes off, whether a tile match requires a special order, and whether flashing at the valleys and chimney needs rebuilding. We give you a written line-item price before any work starts, with no numbers that move at the door. The price you approve is the price you pay, and all completed work is covered by our 365-Day Done Right Promise: if the installation fails inside that full year, we come back and correct it at no charge. Any CGI tile repair or replacement we do is quoted in writing, and we tell you up front if a match is a special order so you know the timeline before you commit.
DIY or Call Us?
You can safely do a few things from the ground. Check the attic for dark wood or a moisture smell after a rain. Note which direction the leak stain is spreading. Look up at the ridge and hips with binoculars for cracked or lifted pieces. What we don’t recommend is climbing a roof on a ladder to fix it yourself. Roof work puts you at height on a pitched surface, and the failure mode with CGI tile is a piece that cracks underfoot and lets you drop through where the decking is already soft. Tile and shingle systems also need the underlayment and flashing done correctly, and a patch that leaves the flashing wrong will leak again within a season. If you have a stain or a lifted tile, call (833) 734-2429 for a free estimate. We’ll tell you honestly whether it’s a $400 repair or a larger job.
FAQs

How long does CGI roofing last in Mission Viejo? Concrete tile under normal conditions typically lasts several decades, while shingle systems usually run 20 to 30 years before granule loss and UV damage catch up with them. Mission Viejo’s hot dry summers shorten the shingle window somewhat compared to coastal communities, so bank on the lower end if your roof takes full afternoon sun. Call (833) 734-2429 for a free roof assessment to pin down how much life yours has left.
Can my CGI roofing be repaired instead of replaced? Often, yes. A cracked tile, a lifted field piece, or a flashing leak is a repair, not a replacement, and we’ll say so if that’s what you have. Replacement only becomes the answer when granule loss is widespread, the underlayment is past its life, or the decking is soft in more than one area. Call (833) 734-2429 and we’ll give you the honest split between the two.
How long does a repair or replacement take? A targeted tile repair is usually done in a half day to a full day, depending on access and how many pieces are involved. A full replacement typically runs a few days on an average Mission Viejo roof, longer if decking has to be rebuilt. Special-order tile matches can add lead time, and we flag that before you approve. Call (833) 734-2429 to schedule a free estimate.
How do you source the right CGI part? We confirm the series, span, and color lot from the existing roof before ordering, and we tell you plainly whether an OEM match is needed or a specified aftermarket equivalent will do. Every part comes with a manufacturer spec behind it, and we don’t guess on interlock for a tile system. Call (833) 734-2429 for a free estimate so we can start with your roof’s actual numbers.
Written by the team at Bradford Remodeling Co Mission Viejo, serving Mission Viejo and nearby areas.












