







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Driveway & Pavers: The Mission Viejo Owner’s Guide
If you have a CGI driveway or paver system that has failed, we install CGI-compatible replacements in Mission Viejo, and paver driveway installation typically runs $7,000 – $18,000 installed. Concrete driveway work lands between $4,500 and $12,000, and driveway replacement sits at $5,000 – $14,000. Most owners discover the problem the same way: a paver lifts near the driveway apron after a winter rain, or a hairline crack in the concrete widens into a loose slab within one heating season. By the time it’s visible, the base course underneath is usually already compromised. We’re an independent contractor and not affiliated with CGI, so our job is matching the right spec to your system, pricing it in writing, and installing it to hold.
Which CGI Models This Applies To
CGI’s paver and driveway systems show up across a few product lines, and the part you need depends on which one you have. The most reliable way to identify your system is the stamp on the underside of a lifted paver or the original install documentation if the previous owner left it. CGI pavers are typically 60mm or 80mm thick for driveway use; 60mm is fine for patios and walkways but undersized for a driveway carrying a full-size SUV day after day. That thickness difference is the single most common compatibility gotcha we see in Mission Viejo – a homeowner buys a matching-color paver that’s 60mm to replace a failed 80mm drive unit, and it rocks loose within a season because the base is set for the heavier profile. For the base course itself, CGI-compatible aggregate base runs 3/4-inch crushed stone compacted to 4 – 6 inches for residential driveways. Whether to go OEM or quality aftermarket is a real decision: OEM guarantees the exact profile and color match, while a good aftermarket equivalent can cut cost 15 – 25% if the base prep is done right. We’ll walk you through which is the honest choice for your system before any material is ordered.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Driveway & Pavers Is Failing
- Pavers lifting or rocking at the edges. The bedding sand has washed out or the edge restraint failed. In Mission Viejo, the winter rain pattern concentrates runoff at the driveway apron where the slope meets the street, and that’s almost always where the first paver comes loose.
- Widening cracks in the concrete slab. Hairline cracks that spread across a season usually mean base settlement, not just surface wear. The slab is moving because what’s underneath it stopped supporting it.
- Sunken sections or low spots holding water. Poor compaction at install or soil movement under the base course. Standing water after rain is the tell – it means the grade is already off.
- Efflorescence or white chalky staining on paver faces. Mineral salts wicking up through the paver from moisture trapped in the base. Common in coastal-influenced climates like Mission Viejo’s, and it points to drainage that isn’t moving water away fast enough.
- Joint sand washing out between pavers. The polymeric or joint sand has degraded or was never properly installed. Once the joints open, water gets into the base and everything above it starts to fail.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for the most common CGI-compatible driveway work in Mission Viejo:
| Scope | Installed Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Driveway replacement | $5,000 – $14,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway sealing (maintenance) | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
The range is driven by square footage, base course depth, paver thickness (60mm vs 80mm), edge restraint style, and how much of the existing driveway has to come out before the new base goes down. Every quote we give is written, line-itemed, and fixed before a single tool comes out – no numbers that move at the door. All completed work is covered by the 365-Day Done Right Promise: if the installation fails within the guarantee period, we come back and correct it at no charge.
DIY or Call Us?
There’s a short list of things you can safely check yourself: lift a corner paver to read the thickness stamp, run a level across the driveway to find low spots, and look at where water pools after rain. That’s diagnostic, not repair. What goes wrong for DIY on this work is the base course – a homeowner replaces a failed paver in an afternoon, skips the base recompaction underneath, and the new paver rocks loose within two months. Cutting and setting 80mm units to match an existing patttern, tamping base to spec, and getting the edge restraint right take a crew with the right equipment. Paving isn’t an electrical or gas-line hazard, but it is back-breaking work that fails quietly when the prep is skipped. Call (833) 734-2429 and we’ll give you a written price and an honest call on repair versus full replacement – no pressure either way.
FAQs

A properly installed CGI-compatible paver driveway should hold 25 – 30 years with routine joint sand replenishment and resealing every 3 – 5 years. Concrete driveways typically run 20 – 30 years before surface failure. The variable in Mission Viejo is sun exposure and drainage, not the material itself. Call (833) 734-2429 for a written estimate on your specific driveway.
Sometimes, yes – if the failure is isolated to one area and the base course underneath the rest of the driveway is still sound. A local paver or slab replacement can run a fraction of full replacement. If the base has failed broadly, a patch only buys time. We’ll tell you which situation you’re in after an on-site look. Call (833) 734-2429 to schedule the estimate.
A typical residential paver driveway in Mission Viejo runs 3 – 5 working days, including demo, base prep, compaction, and installation. Concrete driveways usually run 2 – 4 days plus cure time before you can park on it. We’ll give you the exact schedule in the written quote. Call for a free estimate – (833) 734-2429.
We identify your paver thickness and profile from the existing units, order from a supplier that carries the matching spec, and confirm the color and thickness match before install. If an OEM exact match isn’t available, we’ll show you the closest quality equivalent and price both so you can decide. Call (833) 734-2429 for a written estimate.
We also service KraftMaid, Cambria, and Silestone systems for homeowners who want one crew on more of the house. Call (833) 734-2429 for a free estimate on your CGI driveway and paver work in Mission Viejo – a written price before any work starts, and the full 365-Day Done Right Promise on every job.
Written by the team at Bradford Remodeling Co Mission Viejo, serving Mission Viejo and nearby areas.












