







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Bathroom Remodeling: The Mission Viejo Owner’s Guide
A full CGI bathroom remodeling project in Mission Viejo typically runs $9,000 – $28,000 installed, covering demo, rough-in corrections, waterproofing, tile, vanity, fixtures, and finish work. Smaller scope projects land closer to $5,000 – $12,000. We work from a written price and a documented scope before any tool comes out of the truck.
Owners rarely call because they woke up wanting a remodel. They call because something failed. A vanity that’s been quietly pulling away from the wall for two years finally lets go. Grout lines at the shower pan turn dark and stay dark. The tile at the curb sounds hollow when you tap it. By the time the problem is visible, water has usually been working behind the surface for months, and that’s when the parts-versus-project conversation starts.
Key Takeaways
- Installed CGI bathroom remodeling in Mission Viejo: $9,000 – $28,000 for full scope, $5,000 – $12,000 for small bathrooms.
- Every price is written before work starts. No numbers that move once the crew is on site.
- All completed work is covered by the 365-Day Done Right Promise. If it fails inside that window, we come back and correct it at no charge.
- These are not parts we stock. These are projects we build, sourced to manufacturer spec.
Which CGI Models This Applies To

CGI is a building and specification brand, not a single product line, so the first job is identifying what part or component you’re actually dealing with. Look for the model or series label inside the cabinet door, on the fixture tag under the sink bowl, or stamped into the escutcheon plate behind the shower valve. Photograph the label before you measure anything. A part number off a label saves a return trip.
Series compatibility is where most remote buyers get burned. A vanity cabinet built to one depth spec won’t take a top drilled for another, and a shower valve trim from one series won’t seat on a rough-in body from a different one, even when the faceplates look identical in a photo. Measure the rough-in body, not the trim plate you’re holding. Measure cabinet depth and the door-overlay pattern, not just the width. Those three numbers (rough-in, depth, overlay) decide whether a part drops in or forces a rebuild.
On the OEM-versus-aftermarket call: for load-bearing cabinet components and valve bodies, go OEM-equivalent or better and get the manufacturer spec sheet in hand. For decorative hardware, trim, and filler pieces, a quality aftermarket equivalent is a sound decision and saves real money. We work from a documented roster of name-brand materials: KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, Kohler and Moen fixtures. Every spec is traceable. Nothing is left to guesswork.
Bradford Remodeling Co Mission Viejo is an independent service provider. We’re not affiliated with CGI.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Bathroom Remodeling Is Failing
Homeowners usually find the problem in one of five ways. Each one points to a different underlying cause, and the cause matters more than the symptom.
- Hollow-sounding tile at the shower pan or curb. That dead tap means the thinset didn’t bond or the substrate flexed. Water has likely been sitting under the tile, which is why it sounds hollow and why the grout keeps darkening.
- Recurring grout haze or dark lines that won’t scrub out. Recurring discoloration usually means moisture is traveling behind the surface, not sitting on it. Cleaning won’t fix a drainage or waterproofing failure.
- Vanity pulling away from the wall or doors that won’t sit flush. Fasteners backed out, or the cabinet was hung on drywall without proper blocking. The door-alignment drift is the tell.
- Caulk lines that split every 6-12 months. Your Mission Viejo house moves with the seasonal temperature swing, and the joint can’t take it. Either the wrong sealant was used or the joint has no room to flex.
- Water staining at the ceiling below the bathroom. This is the one to act on first. It means a supply or drain connection is leaking inside the wall or floor cavity, and the damage is spreading behind the drywall.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for CGI-compatible bathroom remodeling in Mission Viejo:
| Scope | Installed Price Range |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Vanity installation | $800 – $3,000 |
What drives the range: whether the rough-in needs correction, how much substrate has to be replaced once the old surface comes off, the tile selection, and fixture tier. Parts and labor are broken out line by line on the written quote. You see the price before we start and it doesn’t move once work begins. Every completed project carries the 365-Day Done Right Promise: if the work fails within a full year, we return and correct it at no charge. That’s the Garrison Standard in practice, not on a brochure.
DIY or Call Us?
Some checks are safe and smart to do yourself. Photograph the model label. Measure the valve rough-in and the cabinet depth. Read the manufacturer spec sheet. Those three steps will tell you whether you’re chasing a compatible part or a rebuild, and they cost nothing.
What we’d steer you away from: pulling a shower valve body out of a live wall, opening drywall to chase a leak, or re-setting a shower pan yourself. Those involve water supply, drain connections, and waterproofing that has to be done right the first time. Get it wrong and you’re into remediation, not repair. DIY goes sideways here more often than it saves money.
If the symptom list above matches what you’re seeing, call (833) 734-2429 for a free estimate. A live person answers, 24/7, and we’ll give you a straight number.
FAQs

Expect 15-20 years from quality cabinetry and fixtures, 10-15 from shower valves under normal use. Mission Viejo’s dry summers and wet winters work the joints hard, so expect sealant replacement every few years and watch grout lines in shower areas more closely than you would in a milder climate.
Sometimes. A trim or hardware swap is a genuine repair. A failed shower pan or a vanity pulling off the wall is not. Once substrate is compromised, repair is a patch that fails again in 18 months. Call (833) 734-2429 and we’ll tell you straight which you’re looking at.
A full remodel in Mission Viejo typically takes 2-4 weeks from demo to final walk, depending on substrate condition and material lead times. A vanity or shower replacement is closer to 2-4 days. We’ll put the timeline in writing before work starts, along with the price.
We source against the model and series off your label, not by eyeballing the old part. That means manufacturer spec sheets, verified rough-in dimensions, and documented brands from our approved roster including KraftMaid, Cambria, and Silestone. Specifications are traceable from order to install.
Call (833) 734-2429 for a free estimate. Bradford Remodeling Co Mission Viejo gives you a written price before any work starts, live-person coverage 24/7, background-checked technicians, and the 365-Day Done Right Promise on every completed project. The Garrison Standard means trust in writing, not a handshake.
Written by the team at Bradford Remodeling Co Mission Viejo, serving Mission Viejo and nearby areas.












