A Bradford company - serving Mission Viejo, CA
An open living room and dining area after a whole-home remodel
Boral · Mission Viejo

Boral Windows & Doors in Mission Viejo, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Mission Viejo
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
An open kitchen and dining area after a remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Windows & Doors: The Mission Viejo Owner’s Guide

We install, repair, and replace Boral-compatible windows and doors in Mission Viejo, and a typical replacement runs $4,500 – $15,000 for standard window packages or $8,000 – $25,000 for impact-rated units, with parts-plus-labor quoted in writing before anything is ordered. Most Mission Viejo homeowners discover a problem the same way: a window that won’t latch in July, a sliding door that grinds along the track, or fog between the panes on the south-facing side of the house after a cold morning. Boral products are solid, but they age, and our dry inland heat plus the occasional Santa Ana wind event takes a toll on seals, rollers, and hardware long before the frame itself gives up. We’re an independent service provider, not affiliated with Boral, so we source parts and replacements on the open market and match them to your exact unit.

Call (833) 734-2429

Which Boral Models This Applies To

Boral’s window and door lines have shifted over the years through acquisitions and product consolidations, and the model number stamped on your unit is the key to matching the right part. Look for the manufacturer’s label in three places: on the inside upper corner of the operable sash, behind the jamb where the window meets the wall, and inside the door edge or top rail. That label carries the series and a size code that’s often in millimeters, not inches, which is where a lot of wrong-part orders start. Measure the rough opening and the glass visible opening separately and write both down. When an exact Boral part isn’t available, we spec a quality OEM-equivalent that matches the same dimensions and finish code, and we tell you plainly which one we’re using so the decision is yours.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boral Windows & Doors Is Failing

Here’s what we hear from Mission Viejo owners most often, and what’s actually going on underneath.

  • The window won’t lock or the latch won’t catch. Usually a worn keeper or a frame that has shifted slightly with settling, not a failed lock. A five-minute adjustment often fixes it.
  • The sliding door drags or jumps the track. Rollers flatten and the bottom track collects grit. This is the single most common Boral door repair we handle, and replacing the roller assembly is straightforward.
  • Fog or condensation between the glass panes. The sealed unit’s perimeter seal has failed. Inland heat cycling speeds this up, and no cleaning or re-caulking brings it back; the insulated glass unit has to be replaced.
  • Drafts around the frame or a whistle in high wind. Weatherstripping and the perimeter seal break down faster here because of the dry air and daily temperature swing. Resealing is a real fix, not a patch.
  • Water staining or soft wood at the sill. This is the one to catch early. Water gets behind the sill, and decay in the frame is a bigger job than a gasket. Get it looked at before the damage spreads inward.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In Mission Viejo, standard Boral-compatible window replacement runs $4,500 – $15,000, and impact-rated installation runs $8,000 – $25,000. Those ranges cover the unit, the matching hardware or insulated glass, labor, sealing, and cleanup. What moves you within the range: the count and size of units, whether you’re doing insulated glass only or a full frame, whether impact ratings are required, and finish selections. We give you a written price before any work starts, broken out by parts and labor, so you see exactly what the part costs and what the install costs. The completed work carries our 365-Day Done Right Promise: if the installation or the part we set fails within a full year, we come back and correct it at no charge. That promise is in writing and signed before we pick up a tool.

DIY or Call Us?

Some of this an owner can check safely. Clean the door track and look at the roller, tighten a loose handle, and note where the draft comes in. What we don’t recommend: prying out a sealed glass unit, cutting into a frame to chase a leak, or replacing a sliding door roller on a heavy unit by yourself. Those are the jobs where a weekend repair turns into a full frame replacement, and on a second-story window there’s the height factor too, which means ladders and a genuine fall risk. Let a trained technician take the ones that carry real consequence. Our technicians have up to 22 years of experience, are background-checked, and arrive in uniform so you know who’s at the door. Call (833) 734-2429 for a free estimate and we’ll tell you honestly which repairs are worth doing and which aren’t.

FAQs

A whole-home remodel with the living, dining and kitchen areas opened up

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A wood double vanity with two mirrors after a bathroom remodelA finished backyard cottage with a small covered porchA galley kitchen opened up to the dining room with a new peninsulaA walk-in shower with large-format tile and a built-in nicheA wide opening with a new beam where the kitchen wall was removedA stone counter, tile backsplash and open shelf after a kitchen remodel

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Mission Viejo

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Mission Viejo team

A local vetted partner works across Mission Viejo and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 734-2429
Local Service Coverage

Request a Free Estimate in Mission Viejo

Tell us what you need - Bradford Remodeling Co Mission Viejo responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch