







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Windows & Doors: The Mission Viejo Owner’s Guide
We install Unilock-compatible windows and doors for Mission Viejo homeowners, with installed pricing typically running $4,500 – $15,000 for standard window replacement and $8,000 – $25,000 for impact-rated units; scheduling follows a written scope and the manufacturer’s lead time, not a same-day promise. Bradford Remodeling Co Mission Viejo is an independent service provider and is not affiliated with Unilock.
Owners usually find the failure the same way: a door that won’t seal against the jamb in August, fog between the panes after a winter of marine air, or a window crank that grinds to a stop. By then the part has usually been failing for a season. If you’re pricing a replacement or a repair, call (833) 734-2429 and we’ll put a written number in front of you before anything is ordered.
Key takeaways:
- Unilock windows and doors are matched by series and rough opening – the model label is the starting point, not a guess.
- Installed window replacement in Mission Viejo runs $4,500 – $15,000; impact-rated windows run $8,000 – $25,000.
- Every job gets a written price before work starts and carries the 365-Day Done Right Promise.
Which Unilock Models This Applies To

Unilock builds several window and door lines, and the part that fits one series won’t fit another. The hinge side, the sill profile, the operator hardware, and the rough opening all change between lines. Before we quote anything we find the manufacturer’s label, usually on the jamb or the sash edge, and read the series and size off it. If the label is gone, we measure the rough opening and the frame depth directly and match from there.
The OEM-versus-aftermarket decision matters more on Unilock than on generic units. Factory parts keep the original warranty terms intact, and on a door with a multi-point lock the OEM hardware is the only way the lock geometry stays true. Quality aftermarket equivalents make sense for wear items – weatherstripping, sill sweeps, crank operators – where the spec matches and the price gap is real. We work from a documented roster of name-brand materials, including Unilock, Therma-Tru, and James Hardie, so specs stay traceable. We also handle KraftMaid, Cambria, and Silestone on the interior side of the same projects.
One compatibility gotcha worth knowing: Unilock’s sliding door panels are not interchangeable left-to-right across every series. A panel ordered for the wrong hand will hang, close, and leak – and it will look correct on the truck.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Windows & Doors Is Failing
- Fog or condensation between the panes. The sealed glass unit has lost its desiccant seal; the glass itself is fine, the unit is done. Common after ten-plus years of inland heat cycling.
- A door that drags or won’t latch in summer. The frame has swelled or the hinge screws have pulled, and the door is riding out of square. Left alone, the latch strikes wear and the lock fails next.
- Grinding or stiff window cranks. The operator mechanism has dried out or the arm is bent. A crank that fights you is a part on its way out, not a lubrication problem.
- Daylight or draft at the jamb or sill. Weatherstripping and sill sweeps have flattened. In Mission Viejo’s coastal-influenced air, that gap pulls moisture into the wall cavity, not just cool air into the room.
- Water staining on the interior sill. The sill pan or the perimeter seal has failed and water is getting behind the frame. This is the one to act on first – the damage behind the drywall is always worse than what you can see.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here are the installed ranges we quote in Mission Viejo. These are parts plus labor, not a parts-only number.
| Work | Installed range |
|---|---|
| Window replacement | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
| Door replacement (single unit) | Quoted per unit and series |
What moves the number: series and glass package, the number of openings, whether the rough opening needs reframing, and whether the trim and sill need to be rebuilt. A straightforward sash-and-glass swap sits at the low end; a full frame replacement with new flashing and interior trim sits at the high end. Every quote is written line by line before work starts, and the price doesn’t change at the door. All completed work carries the 365-Day Done Right Promise: if it fails within that year, we come back and correct it at no charge.
DIY or Call Us?
Some checks are safe and worth doing yourself. Look for the model label on the jamb. Measure the rough opening. Clean and lubricate a stiff crank with the manufacturer’s recommended product. Note where the draft or the stain is.
Where DIY goes wrong: glass unit replacement requires the right unit thickness and the correct glazing setting, and a mis-seated unit voids the seal. Door realignment on a multi-point lock system is worse – adjust the wrong point and the lock stops engaging, which turns a door problem into a security problem. Frame-level work means cutting into the wall, and water intrusion behind a bad install shows up months later. Our technicians have up to 22 years of experience and are background-checked and uniformed on every job. Call (833) 734-2429 and we’ll tell you honestly whether you need a part or a full unit.
FAQs

Expect 15 – 20 years for the frame and 10 – 15 years for the sealed glass unit in this climate. Inland heat cycling and coastal moisture both shorten glass seal life; a fogged unit at year twelve is normal wear, not a defect. Call (833) 734-2429 for an exact quote – estimates are free.
Often yes. Cranks, weatherstripping, sill sweeps, and hinge hardware are repairable when the spec matches. A failed sealed glass unit or a frame that has gone out of square means replacement. We’ll tell you which one you’re looking at after we see it.
A single sash or operator swap is a short visit; a full window or door unit replacement is typically a day per opening, sometimes two if the rough opening needs reframing. We schedule against the manufacturer’s lead time, which we confirm in writing before you commit.
We read the series off the label, match the spec, and order through the manufacturer or a documented equivalent supplier. You get the part number and the price in writing before the order goes out.
Ready to price it? Call Bradford Remodeling Co Mission Viejo at (833) 734-2429 for a free estimate. A live person answers 24/7, every price comes in writing before work starts, and the job closes squared away – clean site, documented scope, signed guarantee in your hand.
Written by the team at Bradford Remodeling Co Mission Viejo, serving Mission Viejo and nearby areas.












