







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Driveway & Pavers: The Mission Viejo Owner’s Guide
We install ActiveYards driveway and paver systems for Mission Viejo homeowners, and a typical installed paver driveway here runs $7,000 – $18,000, with most residential jobs landing in the $9,000 – $13,000 range once base prep, edge restraint and polymeric joint sand are included. We aren’t affiliated with ActiveYards – we’re an independent contractor that knows the product line and installs it to manufacturer spec. Most owners don’t discover a problem until a paver rocks underfoot after a winter storm, a dark stain spreads down the middle of the driveway, or the polymeric sand washes out for the second spring in a row.
That’s the tell. Mission Viejo sits on clay-heavy soil through the Lake Mission Viejo and Cordova Canyon areas, and clay swells with the winter rains and shrinks hard in summer. A paver surface installed over an under-compacted base will move with that clay, and the failure shows up at the edges first.
Key Takeaways
- Installed ActiveYards paver driveway pricing in Mission Viejo: $7,000 – $18,000.
- The most common failure we see in Mission Viejo is base failure, not paver failure – the block is usually fine and the substrate underneath isn’t.
- Polymeric joint sand in our climate typically needs refreshing every 3 – 5 years if the base is sound.
- We pull written pricing before any work starts, and every install is covered by our 365-Day Done Right Promise.
Which ActiveYards Models This Applies To

ActiveYards makes interlocking concrete pavers in several collections with different face dimensions, thickness and corner shapes. The three specs that matter when matching: nominal thickness (most residential driveway pavers are 2⅜ inches; patios can be 2 inches), face module (a running-bond “Onyx” style block won’t match a “Tumbled” or “Belgian” style profile even in the same base color), and corner/edge units. ActiveYards sells dedicated corner pavers and double-edge pavers for finishing runs. If you’re patching an existing driveway, using field pavers chopped to make corners will look wrong from ten feet away, no matter how clean the cut.
How to identify your pavers: measure a full paver at three points with calipers or a machinist’s rule. If it’s under 2¼ inches, it’s a patio unit and shouldn’t be driven on. Look at the pallet banding or the original invoice if you kept it. Every ActiveYards seller uses collection names on the pallet label, so a photo of the label plus a measurement usually gets us the right match in one visit.
OEM vs. aftermarket: OEM ActiveYards pavers are the only way to guarantee color, face-texture and thickness match. Aftermarket equivalents from other manufacturers may get close on color and get the thickness wrong, and a mismatched thickness shows in the surface plane within months. For small repairs, we sometimes source from a different manufacturer’s tumbled line if color is close and the size is exact – but we tell you when we’re doing it and why. For jobs using KraftMaid cabinetry, Cambria or Silestone surfaces alongside the hardscape, the same rule applies: matched spec, documented product.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Driveway & Pavers Is Failing
Pavers themselves are tough – the failure mode is nearly always what’s under them, what’s between them, or what’s holding their edges. Here’s what Mission Viejo owners actually report, and what each one points to.
- Pavers rocking when you walk or drive across them. The bedding layer has lost contact with the base, usually from water intrusion at a low spot. Once a paver rocks, the sand under it keeps migrating and the noise gets worse.
- Polymeric sand washing out every winter. Polymeric sand isn’t a permanent joint fill – it’s a wear item. In our climate, sun cycling plus winter rain typically takes it down in 3 – 5 years. Repeated washout in under two years points to improper joint depth or wet installation.
- Dark staining down the center of the driveway or in tire tracks. That’s efflorescence plus organic staining from water sitting on the surface. Occurring in a defined strip usually means a low spot in the base, not a surface cleaning problem.
- Sunken or heaving sections near the garage apron or street cut. Clay soil at the transitions swells and settles. When you see this within 12 months of install, the base wasn’t deep enough or wasn’t compacted in lifts.
- Edge units leaning or separating along the perimeter. The edge restraint has failed or wasn’t set deep enough. Unrestrained pavers migrate outward, one course at a time, and the joint pattern opens up.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed paver driveway pricing in Mission Viejo follows the same range we quote everywhere in South Orange County: $7,000 – $18,000. Below that, we’d be skipping excavation or base prep, and you’d be paying for it in three years.
| Line item | Typical range |
|---|---|
| Full paver driveway install (excavation, base, pavers, sand, edge) | $7,000 – $18,000 |
| Paver driveway replacement (existing pavers removed, base rebuilt) | $5,000 – $14,000 |
| Paver patio install (smaller footprint, patio-grade spec) | $3,500 – $11,000 |
| Sealing (protectant spray, not a fix for base issues) | $250 – $700 |
| Concrete driveway install (comparison, not our active quote) | $4,500 – $12,000 |
What drives the range: driveway square footage, how much existing concrete or asphalt has to be hauled off, depth of excavation required for our clay soil (usually 6 – 8 inches of compacted Class II base for a driveway), curb transitions, drainage corrections, and the paver collection you pick. What’s included every time: written line-item pricing before any tool comes out, excavation and base in compacted lifts, edge restraint set in concrete, polymeric joint sand, full site cleanup with pavers swept, and our 365-Day Done Right Promise in writing. If the work fails inside that year, we come back and correct it at no charge.
DIY or Call Us?
Setting a paver in a joint with fresh polymeric sand, checking a joint for depth, or photographing a pallet label to identify your model – all reasonable. Sweeping off surface staining with a nylon brush and mild detergent – fine. What goes wrong when a homeowner takes it further:
- Lifting pavers to fix “just one low spot” almost always displaces the bedding sand around it, and now five pavers are loose instead of one.
- Re-sanding with regular playground sand instead of polymeric fill – it lasts one rainy season and weeds grow through it.
- Pressure washing at high PSI to remove staining strips the surface from the pavers and removes joint fill. It looks worse in six months.
- Re-tamping by hand with a plate compactor never matches the compaction a roller or vibratory plate on a properly moistened base achieves, and the base is where the problem usually lives.
None of this is dangerous – nobody gets hurt installing a paver – but it does waste weekends and money. If the surface has been moving for more than a season, call us at (833) 734-2429 and we’ll tell you honestly whether it’s a repair or a rebuild.
FAQs

A properly installed ActiveYards paver driveway on a compacted 6 – 8 inch base with concrete edge restraint typically holds 25 years or more. The pavers themselves often outlast the joint fill by 5 to 1. Polymeric sand needs refreshing every 3 – 5 years in our climate. If the base was undersized for our clay soil, you’ll see movement in the first 1 – 3 years – that’s the timeline to watch. Call (833) 734-2429 for an on-site assessment and a written price.
Yes, and it’s often the right call. If the failure is localized – a low spot near the garage apron, a single sunken panel, a failed edge run – we can lift pavers, rebuild the base in that section, and re-sand the joints. Section repairs usually land under $2,500 installed. If the movement is widespread across more than 20% of the surface, or if the original base is clay and unexcavated, patching will just fail again. We give you the honest read before you spend anything.
A typical Mission Viejo driveway install runs 3 – 7 working days from demolition to final sweep, weather permitting – the excavation and base compaction phases are what take the time. A localized repair is usually a one-day job. We schedule it so you have driveway access back before the weekend whenever possible. No same-day installs – nobody installs a driveway that fast and gets it right. Call (833) 734-2429 to schedule your free estimate.
We match by collection, face module, thickness and color using your pallet label, original invoice or physical measurement, and we source through ActiveYards’ normal dealer channel. We don’t stock pavers – every job is ordered to spec for your driveway. Dye lots vary between production runs, so on repairs we order generously (typically 5 – 10% overage) so the finished run has consistent color, and we tell you when a lot-match can’t be guaranteed before you approve the price.
If you’re staring at a driveway you don’t trust, call Bradford Remodeling Co Mission Viejo at (833) 734-2429 for a free estimate. You’ll get a written price before any work starts, background-checked uniformed technicians on the job, a live person on the phone if you call after hours, and the 365-Day Done Right Promise on the completed work – signed and in your hand when we leave the site. That’s what squared away looks like.
Written by the team at Bradford Remodeling Co Mission Viejo, serving Mission Viejo and nearby areas.












