







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Driveway & Pavers: The Mission Viejo Owner’s Guide
We install Mr-Glass-compatible driveway and paver systems in Mission Viejo, and most residential paver driveways here run $7,000 – $18,000 installed, with concrete replacement at $4,500 – $12,000. Owners rarely discover a failing paver driveway all at once. It usually shows up as a low spot that holds water after the first winter rain, a paver that rocks under the tire, or a hairline crack that widens across two seasons. Driveways fail from the base up, and Mission Viejo’s clay-heavy soil and summer heat cycle make that failure pattern predictable.
Bradford Remodeling Co Mission Viejo is an independent remodeling contractor. We’re not affiliated with Mr-Glass, and we don’t speak for them. What we do is install the paver and driveway systems their specifications call for, to manufacturer spec, with a written price before anything moves.
Key Takeaways
- Failing driveways almost always mean a failed base, not failed pavers. The surface shows the problem the base created.
- Installed paver driveways in Mission Viejo run $7,000 – $18,000. Sealing alone runs $250 – $700.
- Clay soil and differential settlement drive most Mission Viejo driveway failures, not the pavers themselves.
- You get a written price before work starts and a 365-Day Done Right Promise on the finish.
Which Mr-Glass Models This Applies To

Mr-Glass specifies paver and driveway systems across its residential product lines, and the specification matters more than the model label. What you’re matching is the paver series, the thickness, and the base build-up the specification calls for, not a serial number on a sticker. On a paver driveway, the surface course is usually 60mm pavers over a compacted aggregate base; the base depth is what the specification sets and what most failed driveways got wrong.
To identify what your property actually needs, start with three things. The original build documents or plan set, if you have them. The paver dimensions on a pulled unit (measure length, width, and thickness in millimeters). And the base conditions under the failure spot. That last one decides the scope. An owner with a paver surface over a failed base is looking at a rebuild of the base, not a swap of the top layer.
On the OEM-versus-aftermarket question, our position is simple: match the manufacturer’s specification and document the material. We work with a documented roster of name-brand hardscape products, including Belgard and Unilock, so the specification is traceable and the warranty backs the material. We also service KraftMaid, Cambria, and Silestone products across our remodeling work. What we don’t claim is that we stock Mr-Glass-branded parts or carry them on a truck. We source to your specification and confirm the match before the first paver comes up.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Driveway & Pavers Is Failing
- Water pooling in one low spot after rain. The base has settled or wasn’t compacted to depth. Surface patching won’t fix it; the base has to be corrected.
- Pavers that rock or shift underfoot. The bedding layer has washed out or the joint sand has failed. A single rocking paver often means a wider bedding problem.
- Sand washing out of the joints. Joint sand loss lets water into the base and accelerates settlement. It usually starts at the driveway crown where runoff concentrates.
- Widening cracks or heaving at the edges. Clay soil expands and contracts with Mission Viejo’s wet-dry cycle, and an under-built edge is the first place it shows.
- Efflorescence or persistent staining. Mineral bloom or trapped moisture under the surface. Sometimes it’s cosmetic and a proper seal fixes it; sometimes it points to poor drainage underneath.
We see a version of this specific to Mission Viejo: driveways on slopes that drain toward the garage slab, where a marginal base fails within a few seasons because water never leaves the pavement. That’s a drainage and base problem, and it’s fixable when it’s identified before the garage slab is affected.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what driveway work runs in Mission Viejo, priced as installed ranges. The number depends on square footage, base conditions, access, and whether we’re rebuilding the base or working over a sound one.
| Scope | Installed range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement (full tear-out) | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
What drives the range: base rebuild versus surface-only work, drainage corrections, edge restraints, and the paver series you select. We give you a written price before any work starts, itemized by scope, so you see the base work and the surface work separately. No numbers that move at the door. The completed work is covered by our 365-Day Done Right Promise: if it fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
What you can safely check yourself: photograph the low spots after rain, measure the paver thickness on a pulled unit, note where the water goes, and pull your plan set. That’s the information we need to price the job accurately.
Where the DIY path goes wrong is the base. A paver surface laid over an uncompacted or shallow base looks finished and fails inside two seasons, and a driveway tear-out without edge restraint or drainage correction repeats the original failure. The base is the whole job. That’s a crew-and-equipment problem, not a weekend problem.
Our technicians have up to 22 years of experience with driveway and hardscape work, and they show up background-checked and uniformed, so you know who’s on your property before they arrive. Call (833) 734-2429 for a free estimate. A live person answers around the clock.
FAQs

A properly built paver driveway should last 25 to 30 years or more, and the failure point is almost never the paver itself. The base and drainage decide the lifespan. In Mission Viejo’s clay soil and wet-dry cycle, an under-built base can fail inside five years, while a correctly compacted and drained base holds up for decades. Call (833) 734-2429 to have us assess your base conditions.
Sometimes yes, and the deciding factor is whether the base has failed. Isolated settlement or joint sand loss can often be corrected by lifting and re-setting the affected area and re-sanding. Widespread rocking, heaving, or water pooling means the base is the problem, and surface repair won’t hold. We scope it before quoting, so you get the honest answer up front. Call (833) 734-2429 for an estimate.
A typical driveway replacement in Mission Viejo runs about three to seven working days, weather permitting, depending on square footage and whether we’re rebuilding the base. Sealing alone is often a single day. You get the schedule in writing before work starts. Call (833) 734-2429 to schedule your estimate.
We source to your Mr-Glass specification, confirming paver series, dimensions, and base requirements against a documented roster of name-brand hardscape manufacturers. The material specification and its warranty are in your written quote. We don’t stock Mr-Glass parts and we don’t carry them on a truck. Call (833) 734-2429 and we’ll walk through the sourcing on your specific project.
Written by the team at Bradford Remodeling Co Mission Viejo, serving Mission Viejo and nearby areas.












