







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Driveway & Pavers: The Mission Viejo Owner’s Guide
We install CWS-compatible driveway pavers across Mission Viejo, with paver driveway installation running $7,000 – $18,000 for a typical two-car frontage and driveway replacement at $5,000 – $14,000 when the base can be reused. Every price is written before work starts, and the work carries the 365-Day Done Right Promise. Owners usually discover the problem the same way: a paver rocks under the front tire on the way in, or the once-straight seam along the garage apron opens a quarter inch wider after a wet spring.
Which CWS Models This Applies To

CWS covers a range of profile and color lines, and the spec that trips people up is the face size, not the color name. A 60mm interlocking paver and a 80mm paver built for driveway loads look similar in a brochure photo until you measure. Mission Viejo frontages are commonly set with 60mm pavers on pedestrian paths and thicker units where cars sit, so the first step is confirming what the existing unit actually is: pull one paver near the driveway edge and measure its thickness, then note the width and length of the face. Any ink-stamped or bag-label marking on the target band tells you which CWS line was sourced.
That measurement matters because OEM units and quality aftermarket equivalents are not always interchangeable. Color lots shift between production runs, and a paver from a new lot against existing sun-faded stone can read a half-shade off in afternoon light, which Mission Viejo yards get plenty of. When an exact OEM match is out of production, we set the replacement band as a deliberate border or apron line so the difference reads as design instead of a patch. We carry no parts and hold no stock; every unit is sourced per project. Bradford Remodeling Co Mission Viejo is an independent service provider, not affiliated with CWS.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Driveway & Pavers Is Failing
- Rocking or tipping pavers. A unit that moves underfoot has lost its bedding sand or the base beneath it has settled. In Mission Viejo’s clay soils, water working under the edge is the usual driver.
- Weeds pushing through joints. Sand washed out of the seams leaves gaps that seed into. It’s rarely the weed’s fault; it’s a joint that stopped being filled.
- Sunken areas in the drive path. Wheel paths that dip toward the garage or street mean base compaction failed. West-facing runs that bake all day see this sooner.
- Chipped edges or cracked corners. Edges spalling usually point to an edge-restraint failure, not bad pavers. Without a solid border, the field spreads outward.
- Standing water after rain. Water pooling instead of draining to the street points to a slope or grade issue. That’s a base rebuild, not a surface touch-up.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Mission Viejo driveway work fits these installed ranges. Paver driveway installation runs $7,000 – $18,000. Concrete driveway installation runs $4,500 – $12,000. Asphalt driveway paving runs $3,500 – $9,000. Driveway replacement runs $5,000 – $14,000. Driveway sealing runs $250 – $700 and is a maintenance line, not a fix. Paver patio installation runs $3,500 – $11,000.
What drives the number: square footage, whether the base is removed and rebuilt, base depth on a Mission Viejo slope, edge restraint, and drainage correction. Every job gets a written, line-item price before any work starts: parts, labor, base prep, haul-away. No numbers that move at the door. The 365-Day Done Right Promise covers the completed work for a full year; if it fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
You can safely check three things yourself: measure a loosened paver’s thickness and face size, photograph the failing area with something for scale, and note where water stands after rain. What you should not take on is a base rebuild or a full band replacement. Half-done base work is how a driveway looks fine in October and has a wheel-path rut by March, and pulling a field of interlocked pavers without disturbing its neighbors takes a restraint plan and the right compaction tools. If you’re weighing a surface re-sand and seal against a base rebuild, that’s the call worth making with someone who can look at it. Call (833) 734-2429 and we’ll schedule a free estimate.
FAQs

A properly based and restrained paver driveway typically holds 25 to 30 years, with the base doing most of the work. Mission Viejo’s sun exposure fades color faster than it wears the stone, and a seal every few years stretches the finish. Call (833) 734-2429 for an exact quote on your driveway – estimates are free.
Yes, and often it should be. A rocking band or a single sunken run can be lifted, re-based, and re-set without replacing the whole driveway. If the base under the drive path has failed across the width, a partial fix just delays the same failure.
A small band replacement is typically a one- to two-day job; a full paver driveway runs several days depending on square footage and base work. We give you the schedule in writing before we start.
We identify the CWS line from measured specs and any markings, then source the matching units per project – we hold no stock and carry no parts on a truck. Where an exact OEM match is unavailable, we quote a documented equivalent and show you the plan before you commit. For other systems, we also work with KraftMaid, Cambria, and Silestone.
Written by the team at Bradford Remodeling Co Mission Viejo, serving Mission Viejo and nearby areas.












