







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Kitchen Remodeling: The Mission Viejo Owner’s Guide
Schluter kitchen remodeling in Mission Viejo runs $14,000 – $45,000 installed, and most of that spread comes down to tile work, waterproofing, and whether the substrate underneath is sound. Schluter systems are the uncoupling membrane, waterproofing, and edge-profile products that sit under and around your kitchen tile. When one of them fails, you don’t see the part fail. You see a cracked grout line, a hollow-sounding tile, or a soft spot near the sink. Most Mission Viejo owners find out months after the tile went down, when a grout joint starts walking or a tile near the dishwasher begins to rock underfoot.
Which Schluter Models This Applies To
Schluter is a system brand, not a single part. The products that matter in a kitchen are Schluter DITRA and DITRA-HEAT (uncoupling and heated floor membranes), KERDI and KERDI-BAND (waterproofing for wet areas), KERDI-BOARD (backer board for tile), SCHIENE and JOLLY (edge profiles), and TREP-E or TREP-S for stair-nosing transitions. Identify what you have by reading the printed name on the membrane selvage or the profile face, then measure thickness. DITRA comes in 1/8″ and 5/16″, and those two are not interchangeable for every tile. That’s the compatibility gotcha: a 1/8″ membrane under a large-format 24″x24″ porcelain tile over a wood subfloor is fine in most cases, but a 5/16″ membrane changes your finished floor height at the toe-kick and door thresholds. Too tall and the dishwasher won’t slide back in. OEM Schluter parts are the only safe match for warranty coverage; a generic uncoupling mat from a big-box shelf is an aftermarket equivalent that won’t carry Schluter’s system warranty. Bradford Remodeling Co Mission Viejo is an independent service provider and is not affiliated with Schluter.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Kitchen Remodeling Is Failing
- Hollow-sounding tile. Tap a coin across the floor. A dull thud means the mortar didn’t bond to the membrane. That’s an installation flaw, not a part failure, and the tile has to come up to fix it.
- Cracked grout lines that keep returning. Hairline cracks running in a grid pattern usually mean the substrate is flexing under the tile, which the uncoupling membrane should have absorbed if it was installed correctly.
- Loose or rocking tile near the sink or dishwasher. Water got under the edge and the thinset released. In kitchens, this is the most common failure point because that’s where the KERDI-BAND seam gets rushed.
- Dark or damp-looking grout that never dries. Water is trapped under the tile because the waterproofing layer underneath is compromised. Left alone, this leads to mold in the substrate within a season or two.
- Tile lifting at a doorway or island edge. The edge profile (SCHIENE or JOLLY) wasn’t set deep enough, so traffic catches it and pops it. This is a profile-specific failure, not a tile failure.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what actual Schluter-spec kitchen work runs in Mission Viejo, parts and labor together:
| Scope | Installed Price Range |
|---|---|
| Full kitchen remodel with Schluter system (floor + backsplash) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Backsplash installation (KERDI-BOARD + tile) | $800 – $2,500 |
| Countertop installation | $2,000 – $6,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Cabinet installation | $4,000 – $13,000 |
What moves the number: tile size and type, whether the old floor needs full demo down to the subfloor, whether the subfloor needs leveling, and whether you’re adding DITRA-HEAT. Bradford Remodeling Co Mission Viejo gives you a written price before any work begins, line-itemed so you can see the parts cost and the labor cost separately. Every completed project carries the 365-Day Done Right Promise: a full-year written guarantee, and if the work fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself. Tap the floor for hollow tile. Look under the sink cabinet for signs of moisture around the KERDI-BAND seam. Check the grout lines at the toe-kick and door threshold for cracking. What you shouldn’t do is try to re-set tile or re-apply waterproofing over an existing membrane. Waterproofing is a system: KERDI-BAND has to bond to KERDI with the right thinset, at the right overlap, with no voids. Get that wrong and the failure just moves under the new tile. And if your kitchen plumbing or gas line is near the tear-out, stop there; that’s licensed-trade work. Call (833) 734-2429 and we’ll walk the floor with you, tell you what’s actually failing, and put a written number in front of you before anything gets demoed. Bradford also specs KraftMaid, Cambria, and Silestone on these jobs when the kitchen scope expands past tile.
FAQs

A correctly installed Schluter system under a kitchen floor should hold 20 to 30 years, and in Mission Viejo’s mild coastal climate there’s no freeze-thaw cycle eating at it the way there is in the mountains. The failure point is installation, not the membrane itself. If your floor is 12+ years old and cracking, the cause is usually a bond failure from the original install, not age.
Sometimes, yes. A single hollow tile or a short section of loose edge profile can be pulled, cleaned, and re-set without tearing out the whole floor. Full replacement only becomes necessary when the waterproofing layer is compromised across a wet zone, because you can’t reliably patch KERDI over a failure without cutting back to sound membrane first. Call (833) 734-2429 for an evaluation; it’s free, and we’ll tell you honestly which one you’re looking at.
A backsplash-only Schluter job typically runs 2 to 3 days from demo to grout. A full kitchen floor tear-out and re-install with KERDI and membrane uncoupling is 4 to 6 working days, plus a cure day before grout and a final day for caulk and cleanup. We give you the exact schedule in the written scope, not a verbal estimate over the phone.
We source from Schluter’s authorized distribution network, matched to your specific membrane thickness, profile type, and tile size. That means the part carries Schluter’s own system warranty in addition to ours. Bradford doesn’t stock parts on a truck and doesn’t claim to; the material gets ordered against your actual spec sheet and delivery is scheduled into the job timeline. Call (833) 734-2429 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Mission Viejo, serving Mission Viejo and nearby areas.












